Image Source from cirbus31

Easy Macramé Plant Hanger: Step-by-Step Guide with Photos

Creating a macramé plant hanger is a wonderful way to add a touch of bohemian charm to your living space, and it’s simpler than you might think! In this article, we will walk you through an easy step-by-step process to make your very own macramé plant hanger. With just a few materials and some patience, you’ll have a beautiful piece to showcase your favourite plants.

Materials Needed

Before we get started, gather the following supplies:

• Macramé cord (approximately 3mm thickness is ideal; 3-4 metres will suffice for a standard plant hanger)
• Scissors
• Tape measure or ruler
• A ring or wooden dowel (optional, for hanging your work)
• Pot with a plant (for sizing purposes)

Step 1: Cut the Macramé Cord

Using the tape measure or ruler, cut your macramé cord into several lengths. For a standard plant hanger, cut 4 lengths of cord, each measuring about 1 metre long (you can adjust this based on how long you want your hanger to be).

Step 2: Attach the Cord to the Ring/Dowel

Fold each length of cord in half and loop the folded end through the ring or dowel, creating a lark’s head knot. Pull the ends of the cord through the loop and tighten to secure. You should have 8 lengths of cord hanging down.

Step 3: Create the First Knots

Take the first two cords from the left, and tie a square knot. To do this, lay the left cord over the right cord, then tuck the right cord behind the left and pull it through the loop created. Repeat this step with the right cord over the left, forming the knot.

Step 4: Continue Knotting

Continue to create square knots down the lengths of rope, leaving some space between the knots. You can create as many as you’d like, but a good start is about 4-5 knots. Adjust the spacing based on how deep you want your plant pot to sit.

Step 5: Create the Basket

To create a basket-like effect for the pot to sit in, divide the cords into groups of 4. From these groups, make a series of square knots about 10 cm apart, ensuring the knots are uniform for a tidy look.

Step 6: Trim the Ends

Once you’ve created enough knots for your basket, take a moment to assess the length of the cords. Trim the ends to your desired length, creating a tapered effect. You can leave them straight, or cut them at an angle for a more stylish finish.

Step 7: Add the Plant

Now it’s time to place your favourite plant in the hanger. If you find that it’s hanging too low, you can always readjust the knots or add more.

Step 8: Hang Your Plant Hanger

Finally, choose a suitable location to hang your new macramé plant hanger, such as a hook on the ceiling, a sturdy branch, or even a wall-mounted bracket. Ensure it’s secure and that the plant is positioned where it can get plenty of light!

Conclusion

Congratulations! You’ve now created a stunning macramé plant hanger that adds both style and function to your home decor. Once you get the hang of the basic knots, you can experiment with different patterns and designs, making each plant hanger unique. Happy crafting!

---

Note: Photos in this article are for illustrative purposes. Replace URLs with actual images that correspond to each step in your guide.

No items listed in the response.